Would the lack of plastic pips on the screws holding the base of the Aqua power point to the wall,negatively affect the waterproof seal?
I have a certificate of compliance on the job, however after several years ( presumably the life of the silicon sealant) the outdoor weather proof power points are causing the RCDs to trip.
I assume the plastic pips supplied with he product are there for a reason.
I have a certificate of compliance on the job, however after several years ( presumably the life of the silicon sealant) the outdoor weather proof power points are causing the RCDs to trip.
I assume the plastic pips supplied with he product are there for a reason.