Connect with us

Orcad PCB 386 V4.42 Doesn't work on windows 2000

Discussion in 'CAD' started by Nuri Akman, Jul 18, 2003.

Scroll to continue with content
  1. Nuri Akman

    Nuri Akman Guest

    Hi everyone,

    I'm (trying) using Orcad PCB 386 V4.42 on windows 2000. But, it
    doesn't work. I have a BATCH file for configuring Orcad's environment
    variables. When I try to run that Batch, screen is getting black.

    Also, I try to set environment variables within windows's environment
    variables section. But result isn't change.

    Does anyone can help me?

    My system is Pentium III 933 Mhz, windows 2000, 128 Mb ram, 20 gb
    fat32 HDD, 32 Mb TNT video card.
  2. Boris Mohar

    Boris Mohar Guest

    Try asking I have seen it run on Win2000.
    4.42 is the ESP version. What is the PCB386+ version? The latest is 2.22
    before the shelved it. It is one of the bigger mistakes the made.



    Boris Mohar
    Viatrack Printed Circuit Designs
    Aurora, Ontario
  3. What video driver are you using? Have you tried an ATI card?

  4. Rein Wiehler

    Rein Wiehler Guest

    he must be refering to Install V4.42. We have PCB386+ running on NT4
  5. Chuck Harris

    Chuck Harris Guest

    There is a basic problem when you install Orcad PCB on any windows 95
    and up system. The routines that Microsloth uses to return basic bits
    of information about the environment, don't work correctly.

    Orcad's generated install batch file ends up just full of constructs



    IF NOT . == FALSE. Goto ENVERR

    As a result, your install program will fail miserably. You will have
    to do everything by hand, or boot an old version 6 MSDOS, and do the
    install from there.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day