Connect with us

Orcad - ground plane

Discussion in 'CAD' started by John Dough, Nov 10, 2004.

Scroll to continue with content
  1. John Dough

    John Dough Guest

    Does anyone know how to get orcad to fill up the unused areas of the pcb and
    use it as a ground plane?
     
  2. |> Does anyone know how to get orcad to fill up the unused areas of the pcb and
    |> use it as a ground plane?

    Copper pour. But it won't fill spots where it can't reach a grounded
    pad, so you may have to make ground available in all the places you
    want copper.

    --
    NOTE: to reply, remove all punctuation from email name field

    Ned Forrester 508-289-2226
    Applied Ocean Physics and Engineering Dept.
    Oceanographic Systems Lab http://adcp.whoi.edu/
    Woods Hole Oceanographic Institution, Woods Hole, MA 02543, USA
     
  3. Copper pour (obstacle tool). RTFM.


    Best regards,
    Spehro Pefhany
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-