Connect with us

optocoupler ID

Discussion in 'Datasheets, Manuals and Component Identification' started by UnionTech, Mar 20, 2012.

  1. UnionTech

    UnionTech

    17
    0
    Mar 5, 2012
    Hi guys this is my first post and hoping someone can help me out with a part ID. This optocoupler came off a PLC-2 allen bradley digital input board. My guess is its a darlington pair but wanted to see data sheet to know specs. I have had no luck searching Q4788 which i think is part number. When I tested with an ohm meter i have 450k from base to collector and 900k base to emitter. I think pin 6 is base 5 collector 4 emitter 3 unused 2 cathode 1 anode. I attempted to attach a decent photo of the part. Thanks in advance
     

    Attached Files:

  2. UnionTech

    UnionTech

    17
    0
    Mar 5, 2012
    How about the theory that the optoisolator has a darlington pair output? I'm pretty new to electronic repair and basically doing it as a hobby so not sure why they would use that paticular optocoupler for this application. Or any tips on how to ID it with a meter and test circuit?
     
  3. shrtrnd

    shrtrnd

    3,672
    453
    Jan 15, 2010
    When I worked industrial electronics, I often had to find whatever office in your company
    had the 'as built' literature from the contractor. Somebody, somewhere, has all the
    literature and schematics for all of the equipment installed during the job.
    I'd be looking for a schematic with the part numbers on it.
     
  4. GonzoEngineer

    GonzoEngineer

    321
    0
    Dec 2, 2011
    Looks like an opto from General Insruments.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-