Connect with us

Old Rotary Telephone Connection

Discussion in 'Beginner Electronics' started by Kevin, Dec 23, 2005.

Scroll to continue with content
  1. Kevin

    Kevin Guest

    I recently bought a very old rotary telephone, and I would like to
    hook it up and use it. There are 3 wires in the telephone cord--red,
    green and yellow. How do I hook these wires up to a standard RJ11
    jack? The phone I have has red, green, yellow and black.

    Is there something else I need to modify to get this to work?

    thanks! Kevin
     
  2. Rich Grise

    Rich Grise Guest


    First, don't post HTML.

    Second, call the phone company and see if they still support pulse
    dial.

    If so, then connect red to red, green to green, and leave the
    yellow and black unconnected. It might not ring, but that's a whole
    nother project. ;-)

    Good Luck!
    Rich
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-