Connect with us

(now backlight) lcd display 16*2 bad/now contrast

Discussion in 'Troubleshooting and Repair' started by fiesta, Sep 27, 2014.

  1. fiesta

    fiesta

    1
    0
    Sep 27, 2014
    lcd display bovenkant zijkant.JPG lcd achterkant type etiket.JPG hello members
    i have a controller for a grass/ lawn robot, the display (without back light!!) contrast is bad/nothing.
    Sometimes it does light up, but not too long, but the controller is fully functional.
    I do have resistance to replace it because it is mounted with a board to board header. I did not do it before and there is a change i break up things. Is there a way to make it work again.
    It is a lcd display without backlight!!.: The part number of the display is WM-C1602M-1GNNb / D1499001
    I did already dissamble it, clean the elastomers (contacting rubbers) and glass, but now succes till now.
    the display/controller is exposed to moisture, so this could be due to the problem.
    I look forward to your opinion.
    greetings
    fiesta
    holland lcd display bovenkant zijkant.JPG
     

    Attached Files:

    Last edited: Sep 27, 2014
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-