Maker Pro
Maker Pro

Non working TV

Bob Kingdom

Jul 19, 2015
1
Joined
Jul 19, 2015
Messages
1
I have a Technika LCD 26-207 televison which until today has functioned fine, when switching on from standby this morning nothing happened at all. checked all the connections and power and aerial, remote is working fine, all that happens is that the standby light goes off and then nothing, tried to view a dvd through the tv but once again will not project, Has anybody got any ideas? I have down loaded the Manual but nowhere does it refer to problems of this type
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Hi Bob,
sounds suspiciously like the power supply has failed.
Probably just a capacitor or two.

Can you open it up and post a picture of the board?

Martin
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
Yes, it sounds like a power supply problem. When you open it up, check the fuse first.
 
Top