Maker Pro
Maker Pro

NO VERTICAL DEFLECTION

Hello!

I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I don´t know how to fix it. Some idea?

Thank You
 
iosuesparza:
You should go to the website for this newsgroup at
http://www.repairfaq.org/
there, plan to spend some search time looking over the wealth of
information relating to television troubleshooting and repair
proceedures.
If, after reading through the repairfaq, you are still not certain how
to proceed with your television repair, you should probably TAKE it to
a service shop for, at the very least, a repair cost estimate so you
can make an intelligent repair decision with fact instead of internet
guesses.
electricitym
- - - - - - - - - - - -
 
S

spudnuty

Jan 1, 1970
0
Also check to see if there's a service/normal switch. Sometimes it's on
the CRT board others near the HV on the motherboard. If this switch is
on "service" the display will be a thin horizontal line.
Just had this on a Sanyo that I replaced the Vert scan IC on.
Richard
 
I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I don´t know how to fix it. Some idea?

It's probably (but not definitely) a blown vertical output IC (follow
the wires from the yoke on the CRT to the circuit board) or a coupling
capacitor to the yoke (not all TVs have that cap. If you change this
chip, change the electrolytic capacitors around it as well.
 
Top