Connect with us

Newbies question about R/C servos

Discussion in 'Electronic Basics' started by vietchau, Jun 22, 2007.

Scroll to continue with content
  1. vietchau

    vietchau Guest

    Hi,
    I have a module that takes output signal from a standard R/C receiver
    for servos to control 2 DC motors (Tamiya King Tiger tank system) .
    Now I also have a Brainstem microcontroller that has servos control
    output. My question is can I plug the Brainstem's servos output to
    the module to control the DC motors ?


    Thanks
     
  2. Only, and only, if Tamiya AND Braistem speak the same language.

    HTH

    Stanislaw
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-