Connect with us

Newbie needs assistanse

Discussion in 'General Electronics Discussion' started by Cains, Feb 22, 2017.

Scroll to continue with content
  1. Cains

    Cains

    1
    0
    Feb 22, 2017
    Hi good people of electronicspoint.

    I`m curently buildin a kegorator, and have bought two SF800 flow meters, (As i thought i wolud be plug and play) According to the scematics attached i need to rig some resistors (Wich i have bought now) But as the noob i am i cant figure out how to connect this to a breadboard and up to my Photon.. Could some one please give me advice or even better a suggestion on how to implement this into a cable that goes to my Particle board. I know this is electronics 101 question, but i know beer and not electronics.

    https://developer.mbed.org/cookbook/SF800_flowmeter

    [Mod Note: fixed link]
     
    Last edited by a moderator: Feb 23, 2017
  2. Kabelsalat

    Kabelsalat

    124
    24
    Jul 5, 2011
    Can you post a picture of the unit - there should be three visible terminals or wires according to the drawing.

    Have you any previous experience using breadboards?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-