Connect with us

Newbie ask for Help

Discussion in 'Electronic Basics' started by Frank Whitehead, Aug 18, 2007.

  1. I am just starting out with PC Repair studies and would really welcome help
    with things I need to work on computers.

    What books do I NEED on my desk(dictionary and the like)?
    Where is the best place to get kits, tools etc.?
    Do I really need an Ocilloscope?
    What is the best diagnostic software?
    You get the idea any help would really be helpful!

    Thanks
     
  2. Tom Biasi

    Tom Biasi Guest

    Look into CompTia and A-Plus certification material.
     
  3. Guest

    When I started repairing PCs my Bible was "Upgrading and Repairing
    PCs" - not sure which is the leatest edition.
    I've managed without an Oscilloscope so far, baisic tools in my
    toolbox are:
    a screwdriver, pair of twezzers, small box for holding all the little
    screws, wire strips & snips, multimeter
    Hope this helps
     
  4. Meat Plow

    Meat Plow Guest

    #10 Philips screwdriver
     
  5. Tom Biasi

    Tom Biasi Guest

    With the new Dells you don't even need that.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-