Maker Pro
Maker Pro

New Zenith service menu entry

As everyone who works on Zenith is aware, the old menu-9-8-7-6-enter
code normally enters the service mode.

Some newer sets use a different code, menu-1-9-3-7-enter, to enter the
service mode.
The rest of the stuff like changing 01-factory mode to one to access
all the codes, etc all applies.

David
 
E

Erich J. Schultheis, The Man with the 15 inch Cock

Jan 1, 1970
0
As everyone who works on Zenith is aware, the old menu-9-8-7-6-enter
code normally enters the service mode.

Some newer sets use a different code, menu-1-9-3-7-enter, to enter the
service mode.
The rest of the stuff like changing 01-factory mode to one to access
all the codes, etc all applies.

David

Just tell ppl how to **** up their Zenith televisions --- that's smart.
 

Similar threads

Top