Maker Pro
Maker Pro

Network image injector

Steve Croot

Apr 25, 2018
1
Joined
Apr 25, 2018
Messages
1
Hello all. Just signed up.... hope to participate and help where I can.
I have a problem where a client has asked me to come up with a way of providing their 'logo' to fill the spare channels on their security system monitors.
This basically means I need to somehow inject a single screenshot of their text and/or logo into the spare POE/Network port on their recorder.
Any ideas?
I am pretty handy with an Arduino, but not sure that is the right route. I am thinking maybe one of these Raspberry Zeros? Not used one of those yet.
Goes without saying I have to keep it as cheap as possible. The image could simply be pulled off an SD card, as its not moving.
Any ideas would be great!
 
Top