Connect with us

netgear smpsu update

Discussion in 'Hobby Electronics' started by Peter, May 23, 2006.

Scroll to continue with content
  1. Peter

    Peter Guest

  2. Phil Allison

    Phil Allison Guest

    "Peter"


    ** Some of the component values are kinda hard to read - is the word
    "Schotty" next to the diode on the primary side of the transformer ??





    ....... Phil
     
  3. Ross Herbert

    Ross Herbert Guest


    Note that there should also be a 10nF from pin 8 to gnd (error of
    omission)and the zener at pin 7 is 20V.

    Ross H
     
  4. Peter

    Peter Guest

    yeah, looks like it.
     
  5. Phil Allison

    Phil Allison Guest

    "Peter"


    ** When you find an 800 volt Schottky diode - let us know.





    ........ Phil
     
  6. Peter

    Peter Guest

    hahahahahahaha

    reel him in!!!!!
     
  7. Ross Herbert

    Ross Herbert Guest

    That one has me stumped as well. I had to triple check to make sure I
    was seeing right. I haven't seen this arrangement on any SMPS before.
     
  8. Phil Allison

    Phil Allison Guest

    "Terry Given" = criminal KIWI FUCKWHIT




    ** 1.6 to 1.8 volts drop at rated current !

    ROTFLMAO

    What a schizo, sheep shagging cretyn !!





    .......... Phil
     
  9. Phil Allison

    Phil Allison Guest

    "Ross Herbert"



    ** The 750 kohms simple pre sensitises the current sense input.

    Likely saves the mosfet in some overload conditions.





    ........ Phil
     
  10. Phil Allison

    Phil Allison Guest

    "Terry Given"


    ** WRONG.




    .......... Phil
     
  11. Virus

    Virus Guest

    You mean mosfet will save resistor in some overload conditions.

    Q. What is the fastest thingie on three legs?
    A. FET
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-