Connect with us

Neither tape decks work on Aiwa ZL500

Discussion in 'Electronic Repair' started by Talesin, Apr 30, 2013.

Scroll to continue with content
  1. Talesin

    Talesin Guest

    Cassette decks do not work, just makes clicking noises, will not FF or RW
    either. not in pause mode either, and have cleaned tape transport mechanisms
    and heads.
    Have come to the conclusion that drive belts may have come off pulley or need
    replacing perhaps? Seems a bit strange that both decks are inoperative?

    Can anyone either confirm or make any suggestions/thoughts please before I
    start taking it apart?!!!

    If new belts are required, any suggestions where I may purchase them please as
    this is the first time I have had this problem other than with a very old Sony
    TC377 Reel to Reel that I repaired myself!

    --
    +--------------[ SERVER SIGNATURE ]--------
    | posted via http://www.electrondepot.com
    | Web, RSS and Social Media Interface to
    | sci.electronics.repair and other groups
    +------------------------------------------
     
  2. N_Cook

    N_Cook Guest

    1 motor driving 2 decks is quite common, "infection" perishing many rubber
    bands etc enclosed in the same enclosed space is also quite common.
    I've cut my own bands for the last few years
     
  3. Phoena

    Phoena Guest

    Put it up on Ebay for lots of money like this idjit:

    [deleted]
     
    Last edited by a moderator: Jun 3, 2013
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-