Connect with us

Need scrap Tek plugin

Discussion in 'Electronic Design' started by Robert Baer, Jan 15, 2004.

  1. Robert Baer

    Robert Baer Guest

    If you have a Tek series 7000 plugin that can be ratted out and are
    willing to sell it cheap, please let me know; replace robert with bob
    for useable e-mail address.
     
  2. John Larkin

    John Larkin Guest

    Want a scruffy 7A26? Email me your shipping address.

    John
     
  3. pholroyd

    pholroyd Guest

    try ebay. they are always onsale there. and cheap, too.
     
  4. Jim Yanik

    Jim Yanik Guest

    It might help if you mentioned what 7K unit/project you're working on.
     
  5. Robert Baer

    Robert Baer Guest

    $20-$50 is beyond what a scrap one is worth (have already looked).
     
  6. Robert Baer

    Robert Baer Guest

    I do not think so; i care only for the frame and the main PCB down the
    middle.
    Front can be trash or missing, electronics can be fried.
     
  7. Jim Yanik

    Jim Yanik Guest

    Sounds like what you really want is a 7A17 plug-in;that's a frame,PCB with
    a simple interface amp,and a large perf board area for making your own
    custom circuitry.
     
  8. Bob,
    I have 7D13 and 7B53N (unknown condition) for $1.00 each plus shipping.
    george
     
  9. Robert Baer

    Robert Baer Guest

    Nope. No circuitry is going to be used; just the frame and the main
    PCB down the middle (like i previously mentioned).
     
  10. Robert Baer

    Robert Baer Guest

    Very acceptable; e-mail me your address (replace robert with bob for
    useable e-mail address).
    Robert Baer zip 97035.
     
  11. Jim Yanik

    Jim Yanik Guest

    Well,the simpler PCB for the 7A17 will give you easier access to the edge
    connector,and easier to remove the circuitry you don't want.
    I can't think of any other 7K plug-in with little circuitry on the PCB,and
    they are multi-layer boards,IIRC.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-