Connect with us

need resister help

Discussion in 'General Electronics' started by mike urig, Dec 29, 2007.

Scroll to continue with content
  1. mike urig

    mike urig Guest

    I want to reduce the voltage from 1.5 volts to 1.0 - .90 volts.
    What resister would do this and what end goes toward to 1.5 volt side?
  2. no_one

    no_one Guest

    you need to know the current to know what resistor to use.
  3. mike urig

    mike urig Guest

    Never mind I found the schematic
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day