Connect with us

Need parts to repair USB ports on XBox 360

Reply to Thread

Discussion in 'Troubleshooting and Repair' started by GaryGood, Dec 31, 2019.

Scroll to continue with content
  1. Dec 31, 2019 #1
    GaryGood

    GaryGood

    2
    0
    Dec 31, 2019
    Can anyone suggest the part to replace the serial ports on my XBox 360 Phat (Falcon)? The interior pins are broken. Searched DigiKey without success. The USB ports are the silver rectangular box at right front of the following picture. Much obliged.
    t.jpg
     
  2. Dec 31, 2019 #2
    davenn

    davenn Moderator

    13,765
    1,920
    Sep 5, 2009
    surely they have them, they are available through any electronics parts distributor ... a very common replacement part

    obviously you didn't search too hard ;) :)
    here's one version from them

    https://www.digikey.co.uk/product-detail/en/keystone-electronics/923/36-923-ND/2745643

    are your ones SMD or long leads down into the board ?

    maybe like this one from them

    https://www.digikey.co.uk/product-detail/en/keystone-electronics/921/36-921-ND/317300
     
  3. Dec 31, 2019 #3
    GaryGood

    GaryGood

    2
    0
    Dec 31, 2019
    Thanks for your reply. Yes, I already have parts such as you suggest. What I need is that entire silver rectangular housing holding the dual USB ports. It does not appear that I can open that to get at the interior. There is a plate on one side that can come off with some persuasion, but getting at the parts inside will be quite a challenge. Anybody have any experience with these things?
     
  4. Dec 31, 2019 #4
    davenn

    davenn Moderator

    13,765
    1,920
    Sep 5, 2009
    huh ?

    your photo shows 2 x single ports
     
  5. Jan 3, 2020 #5
    Martaine2005

    Martaine2005

    3,214
    883
    May 12, 2015
    The USB metal enclosure is designed for microsoft. I doubt you will find any with the same size metal housing. You can of course replace them with standard USB replacements as linked to by @davenn but they will have a smaller metal profile/housing.
    Buy a broken xbox board from Ebay if you want the exact same USB profile/housing.
    https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/143461531395
    This is cheap as chips. Just message the seller and ask if the USBs are intact.

    Martin
     
    davenn likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. XBox 360 steering wheel repair

  2. xbox 360 regulator

  3. Xbox 360 wireless receiver

  4. Plastic on back of Xbox 360 controller PCB

  5. Repairing broken cable pls help - pc xbox 360 controller

  6. Xbox One S Controller Repair

  7. C33 Capacitor on Xbox One 1697 Controller

  8. xbox steering wheel

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-