Connect with us

Need information about LED no. and integrator circuit design

Discussion in 'General Electronics' started by shambhu nath yadav, Jan 25, 2004.

  1. 1. I require LED's(component) corresponding to wavelength 1.2um to
    1.8um with their LED number's available in the market.
    2. I require a circuit that does not give output to pulses of 1ms
    pulse width or below,but gives output to the pulses above this width.
    3. I am not getting exact ramp output for integrator circuit.suggest
    me a circuit design(integrator) that gives exact ramp output.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day