Connect with us

Need Help

Discussion in 'Electronic Basics' started by [email protected], Apr 26, 2004.

Scroll to continue with content
  1. Guest

    i am haveing a problem trying to work out the math I have a meter of
    unknown value i want to use as 9 and 15 volt meters. My fluke 75 is
    an auto ranging dmm and it will only move the needle 2/3rds scale. So
    i dont know the full scale resistane of the coil. And I am confused on
    200ua and 200 micro amp. What is 200ua and 200micro amp's? I know ma
    =miliamp,I guess you can tell i am not a wiz with electronics!lol
    Thank You for any help you can give me
  2. So 200micro amp and 200ua are the same (the 'u' stands for 'micro').
    For the voltmete,r take the fluke and connect across the input to the
    unknown voltmeter, put a 1meg pot in the line to the unknown voltmeter and
    then adjust it to read the same as the fluke. Disconnect every thing and
    measure the resistance of the pot to establish the resistance needed to be
    in series with the unknown meter.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day