Connect with us

need help with NAND datasheet

Discussion in 'Electronic Basics' started by The_Truth, Dec 14, 2005.

Scroll to continue with content
  1. The_Truth

    The_Truth Guest

    decoder page
    http://www.hynix.com/eng/02_products/03_flash/down/NAND Flash.pdf

    my 2 chips are
    hynix HY27US08281A - TPCB *leadfree*
    and
    hynix HY27UA081G1M - TCB *not leadfree*

    but I need to know if it is possible to do a swap of the HY27US for the
    HY27UA
    the only conflicts that might matter would be the
    mode:
    "1" (the UA)
    "8" (the US)
    and Die:
    "S" (the US): SLC + Single Die + S/B
    "A" (the UA): SLC + Double Die + S/B

    I'm trying to take an external flash chip and use a "thumbdrive" as a
    cheap flasher.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-