Maker Pro
Maker Pro

need help with identifying this part

Marvin

Jan 19, 2015
2
Joined
Jan 19, 2015
Messages
2
I need help with identifying this capacitor that is on the picture I have included. I would appreciate someone telling me the values, and where I can buy it, and if there is any substitute parts that I can replace this particular part with. The numbers on the part are
7 NF13
XX 0600M
404100C

the XX I can't identify the numbers/letters. it is hard to read

thank you guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I appreciate your help!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Marvin :)
 

Attachments

  • 20150118_212929.jpg
    20150118_212929.jpg
    128.1 KB · Views: 378

davenn

Moderator
Sep 5, 2009
14,262
Joined
Sep 5, 2009
Messages
14,262
looks more like an overvoltage/current protection varistor or PTC

Dave
 

Marvin

Jan 19, 2015
2
Joined
Jan 19, 2015
Messages
2
Wow, that was wery helpful, thank you guys, I really appreciate it.
 

Rory Starkweather

Nov 13, 2014
77
Joined
Nov 13, 2014
Messages
77
Wow, that was wery helpful, thank you guys, I really appreciate it.

I have a problem identifying parts as well. Next time you are at a grocery store buy a box of alcohol swabs. Shouldn't cost much and the hours of trying to get a part number to shine in the light go away . . . pretty much. I still need to wear my glasses and use a magnifying glass, but then I was born before dirt was invented. :)
 

Mel

Oct 25, 2015
9
Joined
Oct 25, 2015
Messages
9
I have a similar part 7 NF 13
xx 0600M
338001D
I hope this will get posted so everyone can see this message (first time I've done this)
 
Top