Connect with us

Need help with BGA footprint

Discussion in 'General Electronics Discussion' started by omdatov, Feb 25, 2010.

Scroll to continue with content
  1. omdatov

    omdatov

    6
    0
    Feb 17, 2010
    Hello,
    Can anybody tell me when I would make the footprint of a BGA component and in the datasheet the give me three value about the diameter of the ball, it means 0.4 , 0.45 and 0.5
    the min , typical and the max so which value should I take ??
    Thanx
     
  2. 55pilot

    55pilot

    434
    3
    Feb 23, 2010
    Both Xilinx and TI have excellent application notes about BGA footprints and a lot of related design issues. Search their websites.
     
  3. omdatov

    omdatov

    6
    0
    Feb 17, 2010
    thanx 55pilot for your help :)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-