Maker Pro
Maker Pro

Need help with Arduino Code

vetenspaksman

Mar 18, 2011
1
Joined
Mar 18, 2011
Messages
1
Hi!

We are stuck in our science project and we are in desperate need of your help! We need to be able to sequentially control eight LEDs using an Arduino Uno. The problem is we have no idea of how to write a suitable code. The LEDs are to be activated in intervals with specific time for on/off for each one. In the first sequence the LEDs must have a special timing unlike the following which will have the same. We have read about delay, loop and interrupt but are unsure of how to use them to fit our purpose.

Best regards
 
Top