Connect with us

Need help with a resistor on a ac adapter

Discussion in 'Troubleshooting and Repair' started by gica69, Feb 8, 2017.

Scroll to continue with content
  1. gica69

    gica69

    9
    0
    Feb 8, 2017
    I have a broken AC Adapter 21.75V for a Black & Decker blower and the red light went off. Opened it up and found a blown resistor.[​IMG] I have the same exact setup just 21.75V instead of the 14.4V. My resistor is a R7 also.
    I get 18.74V at one end of the resistor and nothing at the other end, the old resistor was blown so I don't know what resister to put back. The guy in the link I provided used a 10Ohms 1W but for a 14.4V charger. My charger is 21.75V and 210mA. So doing some math with those numbers I using R=V/I and used 19v and .21A got 77 ohms. That seems too much. So I am stuck. Any help would be appreciated.
    I have another dual charger that has the same size of 21.75V listed when I measured it reads 26.21 at the wire end.
     
    Last edited: Feb 8, 2017
  2. gica69

    gica69

    9
    0
    Feb 8, 2017
    Here are the pictures of the actual AC adapter
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-