Connect with us

Need help with a CD4059A "Divide-By-N" Chip

Discussion in 'Electronic Basics' started by Guest, Sep 15, 2004.

Scroll to continue with content
  1. Guest

    Guest Guest

    I need help setting up this to an N factor of 1000. I am trying to lay this
    chip out on a PCB. I have the manufacturer data sheets, but I don't
    understand them.

    Any help would be great.
  2. JeffM

    JeffM Guest

    I need help
    Despite those folks who warn about EXCESSIVE cross-posting,
    posting the same question individually to 7 groups is a really stupid

    This practice robs those people who do not habitually visit all the
    of the wisdom of others on the topic.
    It also doesn't let everyone know
    when the question has been answered sufficiently.

    If the query is relevant to multiple groups, DO cross-post (within
    Proper use of the Followup-To line is also useful.

    Your question is inappropriate for, sci.electronics.cad, and,
    and is too elementary for
  3. Jamie

    Jamie Guest

    i just took a look at that.
    from what i can see it creates a
    group counter value that you use as
    the down counter segment.
    in other words if you use the /2 then
    the down counter will work in /2 sections
    if you select the /5 then each down count
    will go in /5 counts.
    that is the way i understand it.
    so you can have a divide by 2,5,8,10
    for each down count etc..
    i think its nothing more than a pre'scaler
    that feeds the common down counter.
    that is just what i got from reading it.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day