Connect with us

need help repairing a power inverter

Discussion in 'Troubleshooting and Repair' started by IoDS, Dec 29, 2016.

Scroll to continue with content
  1. IoDS

    IoDS

    2
    0
    Dec 29, 2016
    hello there folks,

    I have a 200w commercial power inverter that's busted , no output voltage

    tried to look for any shorts or maybe blown fuses or resistors but I honestly got lost, maybe you guys can help me repair it , any common faults that power inverters usually has or something ,

    thanks



    [​IMG]
     
  2. davenn

    davenn Moderator

    13,721
    1,913
    Sep 5, 2009
    hi
    welcome to EP :)

    a make and model would be helpful to those that would like to help you ;)


    Dave
     
  3. IoDS

    IoDS

    2
    0
    Dec 29, 2016
    it's a super star, model no ; HPI-220250 made in japan,

    I tried to look for schematics on the internet but there were none
     
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,449
    2,809
    Jan 21, 2010
    Do you have any photos?

    The first place to take photos of would be both sides of the board where components are connected to heatsinks. Also an overall image to give us a feeling of where we are.
     
  5. Alec_t

    Alec_t

    2,909
    791
    Jul 7, 2015
    .... and the photos should be close-up, well-lit and focussed so that component markings can be read easily.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-