Connect with us

NEED HELP making 4-bit adder/subtractor in Logisim

Discussion in 'Electronics Homework Help' started by Austin Cabuco, Dec 10, 2017.

Scroll to continue with content
  1. Austin Cabuco

    Austin Cabuco

    2
    0
    Dec 10, 2017
    Hello, I am a student and need help creating a 4-bit adder/subtractor on logisim which displays the result in a 7-Segment display. My current circuit adds my inputs up to "9" and subtracts up to "0" which is displayed on a single 7-segment. although, I also need to represent negative results with two displays (one being the negative sign and the other being the digit). I also need to display an "E" when overflow occurs. Attached is my current circuit ( the other variation uses only one chip for the adder/subtractor). I greatly appreciate any help :)
     

    Attached Files:

  2. Austin Cabuco

    Austin Cabuco

    2
    0
    Dec 10, 2017
    UPDATE: i attached a labeled schematic
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-