Maker Pro
Maker Pro

Need help identifying part, possibly a resonator

Elyse Dereux

Jan 30, 2015
1
Joined
Jan 30, 2015
Messages
1
I have parts that I need to identify. As you would see below, they all have a manufacturer marking of a large C, with a small o or c inside of it... 1.jpg came from a radio receiver with marking 2.00S or perhaps 2.003. At 2.jpg, which came from a transmitter have a marking 4.00Z. And, lastly 3.jpg also came from a transmitter, with a 4.00h.

Can you guys help me out?
 

Attachments

  • 1.jpg
    1.jpg
    31.6 KB · Views: 170
  • 2.jpg
    2.jpg
    31.6 KB · Views: 168
  • 3.jpg
    3.jpg
    15.4 KB · Views: 148

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
May not be much help, but muRata Ceralock ceramic resonators have the Large 'C' with a small 'm' inside of it as their logo. Might that be an 'm' ?
They DO look like resonators to me.
 

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
Yes look like 2 MHz and 4MHz resonators. The ones with 3 pins don't need external capacitors.
Adam
 
Top