Connect with us

Need help identifying a connector

Discussion in 'Troubleshooting and Repair' started by rad_name, Jun 30, 2012.

Scroll to continue with content
  1. rad_name

    rad_name

    2
    0
    Jun 30, 2012
    Hi guys.

    I need help identifying a type of connector with crimped pins. The wire has come from a set of gauges for my car (Defi) and I need help trying to find what type of connectors these are as I want to make a few more of these wire as the replacement ones are rather expensive.
    Some details are, 2 pins, 2mm spacing between them, 8mm long, 4mm wide (not including base), 4mm tall.

    Cheers for any help.

    http://img43.imageshack.us/img43/20/connector1.jpg
    http://img204.imageshack.us/img204/8197/connector2.jpg
    http://img21.imageshack.us/img21/1728/connector3.jpg
    http://img811.imageshack.us/img811/3719/connector4.jpg
    http://img256.imageshack.us/img256/1192/connector5.jpg
    http://img198.imageshack.us/img198/5149/connector6.jpg
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,497
    2,839
    Jan 21, 2010
    2mm spacing, or is it closer to 1/10 inch (2.54 mm)?
     
  3. gorgon

    gorgon

    603
    24
    Jun 6, 2011
    There looks to be something written on the edge wher the leads go in. Is it more than the 's' I'm seeing?

    TOK ;)
     
  4. rad_name

    rad_name

    2
    0
    Jun 30, 2012
    Last edited: Jul 1, 2012
  5. gorgon

    gorgon

    603
    24
    Jun 6, 2011
    JST is a manufacturer, but the pitch need to be more specific. There are 1.8, 2.0, 2.2, and 2.3 mm variants. Take a look here http://www.jst.com/

    TOK ;)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-