Maker Pro
Maker Pro

Need help finding a couple parts

T

tboner

Jan 1, 1970
0
I am replacing a fuse holder in an audio amplifier and need to find a
source for the following:

3.3 megaOhm resistor 10% tolerance

4A 125V slo-blo panel fuse holder


I went to the local radio shack and they had no idea where to find the
resistor and said they would have to order the fuse holder which could
take weeks.

I am guessing these are common parts that can be found locally or
online -- I just don't know where. I am out of my element here. Please
reply via email if possible - you can probably tell I don't come here
often. ;-)

-Dan in Pennsylvania
 
J

JeffM

Jan 1, 1970
0
Please reply via email if possible[...]I don't come here often.
-Dan in Pennsylvania (tboner)
1) This is not Google Groups. This is Usenet.
You should find out what that is;
add the word "community" to your search.
2) If you can't be bothered to come back,
why should anyone bother to reply.
3.3 megaOhm resistor 10% tolerance
megohm (no "a" with resistors); lower case "o"
4A 125V slo-blo panel fuse holder
I went to the local radio shack and they had no idea
http://www.google.com/local?q=electronic-parts+near:Pittsburgh-PA
You probably have a dead-tree copy of the Yellow Pages
near your telephone.

http://66.102.7.104/search?q=cache:...mouser+newark+allied+all-electronics+bg-micro
(Minimum orders are in effect)
 
R

Rich Webb

Jan 1, 1970
0
I am replacing a fuse holder in an audio amplifier and need to find a
source for the following:

3.3 megaOhm resistor 10% tolerance

4A 125V slo-blo panel fuse holder


I went to the local radio shack and they had no idea where to find the
resistor and said they would have to order the fuse holder which could
take weeks.

I am guessing these are common parts that can be found locally or
online -- I just don't know where. I am out of my element here. Please
reply via email if possible - you can probably tell I don't come here
often. ;-)

Often cited possibilities for general parts like this include:

www.digikey.com
www.mouser.com
www.newarkinone.com
www.jameco.com

Digikey (I'm sure) and several others (I'm pretty sure) don't have
minimum orders but will charge shipping/handling for orders less than
some minimum. Usually not too hard to find enough toys to meet the
minimum, though ...

Also, strongly recommend shrouding your email address in some manner
whenever posting to usenet (also note, usenet != Google).
 
J

JeffM

Jan 1, 1970
0
strongly recommend shrouding your email address in some manner
whenever posting to usenet (also note, usenet != Google).
Rich Webb Norfolk, VA

Google requires a valid email address to get an account.
(They send a verification code.)
They always include that address in the header
for messages from that account.
They do munge *anything* that contains an @ in the middle of a string.
and you have to do a CAPTCHA to see those.

The best someone who posts from Google can do
(without a redirection service) is use a throw-away account to sign up
and obfuscate his real addy in the mesage body / footer.
 
J

Jasen Betts

Jan 1, 1970
0
I am guessing these are common parts that can be found locally or
online -- I just don't know where. I am out of my element here. Please
reply via email if possible - you can probably tell I don't come here
often. ;-)

For locally: check the yellow pages "electronic component suppliers"

Bye.
Jasen
 
It is good to see that if he does come back he will not only find
some advice in finding what he wants but he will also have found
an ass to go along with it.

Please reply via email if possible[...]I don't come here often.
-Dan in Pennsylvania (tboner)
1) This is not Google Groups. This is Usenet.
You should find out what that is;
add the word "community" to your search.
2) If you can't be bothered to come back,
why should anyone bother to reply.
3.3 megaOhm resistor 10% tolerance
megohm (no "a" with resistors); lower case "o"
4A 125V slo-blo panel fuse holder
I went to the local radio shack and they had no idea
http://www.google.com/local?q=electronic-parts+near:Pittsburgh-PA
You probably have a dead-tree copy of the Yellow Pages
near your telephone.

http://66.102.7.104/search?q=cache:...mouser+newark+allied+all-electronics+bg-micro
(Minimum orders are in effect)
 
J

JeffM

Jan 1, 1970
0
2) If you can't be bothered to come back,
It is good to see that if he does come back he will not only find
some advice in finding what he wants but he will also have found
an ass to go along with it.
ketterj @ hotmail.com

Eat shit and die, clueless top poster.
 
T

techie_alison

Jan 1, 1970
0
Rich Grise said:
It doesn't work that way. You post a question to USENET, you come back to
USENET for your answers.
http://www.newsreaders.com/guide/netiquette.html

Good Luck!
Rich

Not in any defence or support of the OP, the various ISPs are in the process
of restricting usenet access. My father has been part of the usenet
community since the mid 90's and swears by it, such that he wasn't too
chuffed to log on a few weeks back after coming out of hospital and to find
the ports blocked, the servers gone. He uses an IBM XT-286 with 16Mb
(16Mb!!! now that's some expansion, REALLY!!).

The 'corporates' would like to brainwash the newer users of the net into
believing it's only flash based web pages and .pdf files which are the web.
They would like you to think that a PIII-800 with 256Mb of RAM and XP is a
minimum spec.

For the OP: USENET is another completely separate 'transport' of what you
see to be the Internet. In some respects it still maintains an element of
human common sense in that a stupid and thoroughly unhelpful answer WILL be
given to a stupid question. The 'Internet' and programming languages as you
see it are not what computers are about, what's 00101010 in decimal? This
is not a friendly place, well it is if you ask the right questions, it's
more friendly than the 'Internet' which you've been conditioned into
thinking is all there is... Don't take it to heart, well, do take it to
heart exactly that, and become part of our very healthy community (of what's
left of it).
 
R

ryan wiehl

Jan 1, 1970
0
techie_alison said:
Not in any defence or support of the OP, the various ISPs are in the process
of restricting usenet access. My father has been part of the usenet
community since the mid 90's and swears by it, such that he wasn't too
chuffed to log on a few weeks back after coming out of hospital and to find
the ports blocked, the servers gone. He uses an IBM XT-286 with 16Mb
(16Mb!!! now that's some expansion, REALLY!!).

The 'corporates' would like to brainwash the newer users of the net into
believing it's only flash based web pages and .pdf files which are the web.
They would like you to think that a PIII-800 with 256Mb of RAM and XP is a
minimum spec.

For the OP: USENET is another completely separate 'transport' of what you
see to be the Internet. In some respects it still maintains an element of
human common sense in that a stupid and thoroughly unhelpful answer WILL be
given to a stupid question. The 'Internet' and programming languages as you
see it are not what computers are about, what's 00101010 in decimal? This
is not a friendly place, well it is if you ask the right questions, it's
more friendly than the 'Internet' which you've been conditioned into
thinking is all there is... Don't take it to heart, well, do take it to
heart exactly that, and become part of our very healthy community (of what's
left of it).
my isp "rogers communications", discontinued all newsgroup services
early this year too after who knows how many years the had it. Was part
of the subscription too,
rw
 
P

Peter Bennett

Jan 1, 1970
0
I am replacing a fuse holder in an audio amplifier and need to find a
source for the following:

3.3 megaOhm resistor 10% tolerance

A 3.3 megohm 10% resistor may be a bit hard to find - you may have to
settle for 5% (closer tolerance, better part)
4A 125V slo-blo panel fuse holder

You probably want a fuseholder for the common (if you are in North
America) 1-1/4" x 1/4" fuses, and some slow-blow fuses to put in it.

Most fuse holders will hold several styles of fuses, and any current
rating in those styles.

I see that someone else suggested Digikey and some other suppliers.


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
Top