Connect with us

Need Help building simple power harness

Discussion in 'General Electronics Discussion' started by JTDman, Sep 5, 2012.

Scroll to continue with content
  1. JTDman


    Sep 5, 2012
    John here. I am trying to build a simple 12v dc harness for connecting running lights on a motorcycle. I want to make this harness so simple that any person can hook it up and have no problems. The additional running lights LED 6 watt 12v dc I want to get 12v dc power from the high and low beam head light or just one. What I need is a circuit that will prevent over load to the 12v LEDs if a motorcycle uses both bulbs when high beam selected and I need to prevent 12v back flow through the high beam or low beam bulb which ever is switched off.

    I need to make this a simple hookup for my riders that buy my parts. Many do not have any experience with any kind electrical. So I would like to have them connect two wires to the headlight and they cannot go wrong. Any help would be appreciated. email me at [email protected]
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day