Connect with us

Need diode specs for sub - Soundstream amplifier

Discussion in 'Electronic Repair' started by Benjamin Jennings, MCP, Apr 16, 2005.

Scroll to continue with content
  1. Greetings, got a SoundStream amplifier I'm working on and the diodes in the
    subwoofer power supply are shorted and apear to be no longer available (at
    least that I've been able to find). They are FED16BT If anyone could
    shed some light on the specs of these as far as current capacity and speed
    or suggestions for a good sub, I'd greatly apprecate it.

    Regards,
    Benjamin Jennings, MCP
     
  2. kip

    kip Guest

    There must be a least a hundred that would replace them.
    Whats the Voltage and estimated current flow ?

    kip\
     
  3. Rono

    Rono Guest

    This is the voltage doubler configuration. RadioShack.com has a 400 volt,
    16 amp unit in TO-220 isolated case, for $1.10 (old catalog). The part
    number is: 900-3010. Not sure that the pinout is exact.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-