Connect with us

need Din rail (T35) relay base

Discussion in 'Electronic Equipment' started by Terrance Silver, Mar 24, 2005.

Scroll to continue with content
  1. Hello:
    We are in need of a relay base for a Hasco 80 amp relay, that mounts on to a
    Weidmuller t35 din rail...any ideas?
  2. CJT

    CJT Guest

    Whoever provided the relay and the rail should be able to help you find
    the piece that goes between them.
  3. Thanks CJT,but...
    The problem is that Hasco makes the rely, weidmuller makes the rail, but no
    one seems to make the base.
    I need to find a designer that could handle this project, as the need for a
    rail mount 80 amp relay is increasing...
    Thanks for your reply,
  4. luke


    Sep 1, 2009
    Weidmuller now makes relays.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day