Maker Pro
Maker Pro

NEC 4FG, 5FG, for parts or repair, and Mitsubishi AUM1371.

S

Sam Goldwasser

Jan 1, 1970
0
I have a non-working NEC 4FG and 5FG taking up space.

The 4FG probably only needs the usual leaking capacitors replaced.

The 5FG has a blown HOT but is in otherwise good condition. I assume that
in addition to the HOT, it needs the leaking capacitors replaced but could
be worse.

I will keep them for about 1 month. After that, they go on the curb
or have parts removed for other projects with the remains going on the
curb. :) For the 4FG, any reasonable offer + shipping (with pickup).
I have the original box. For the 5FG, I'd have to find a box so a bit
more.

I also have a Mitsubishi AUM1371 that probably works at least somewhat.
Make an offer or it goes to KMR Technical Services. Recall that this is
the monitor that will accept a range of scan rates and input types
including I think composite video and NTSC.

Thanks.

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the feedback form on the S.E.R FAQ Web sites.
 
Top