Connect with us

Nasa Target2 installation?

Discussion in 'Boat Electronics' started by Mika, Apr 30, 2009.

Scroll to continue with content
  1. Mika

    Mika Guest

    Need to replace my depth sounder, and Nasa Target2 seems like a good no-frills replacement for my
    20-year old broken sounder.

    However, manual and web pages have only dimensions of display unit, no information about
    installation options or how much space is needed for dashboard or bulkhead installation.

    Not to my surprise, I have so far not received a reply from manufacturer to my questions.

    Certainly 1-2 cm or an inch for cables? But do I need to tighten large wing nuts from inside etc? My
    old display was bulkhead installation with four large screws that were tightened from outside. No
    problems with waterproofing (surprise to me) and very easy to install.

    Thanks in advance to any Target2 owner who cares to comment.

    Mika
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-