Connect with us

Napco Wireless Reporting

Discussion in 'Security Alarms' started by Bob La Londe, Oct 4, 2007.

Scroll to continue with content
  1. Bob La Londe

    Bob La Londe Guest

    Yes it does send detailed information. This is cut and pasted directly from
    the CS log for a P1632.

    Thu 10/04/07 04:38:41 TROUBLE-REST> Area #1-370: (#30) (PROTECTION LOOP)

    Thu 10/04/07 03:39:30 SYS SERVICE>
    Thu 10/04/07 03:39:27 TRBL-SUP> Area #1-384: (#30) (SENSOR LOW BATT)
  2. Bob La Londe

    Bob La Londe Guest

    Hmmm... I don't think I've got any 9600s running wireless, but I'm sure I
    can emulate a sensor polling failure and see exactly what it does on a
    P1632. One thing I can say is that I noticed some inconsistency in how
    P9600s operate and handle some things a few years back when they were
    changing versions. I do have a 9600 in my house. I suppose I could stick
    on a receiver just to test what happens and see what it reports exactly.

  3. Bob La Londe

    Bob La Londe Guest

    Again from a P1632, but its Napco Panel with wireless.

    Supervisory RF Failure:
    TRBL-SUP> Area #1-381: (#23) (LOSS OF SUPER-RF)

    Protection Loop:
    TROUBLE-REST> Area #1-370: (#30) (PROTECTION LOOP)

    TAMPER> Area #1-383: **TESTING** [TVRS](#23) (SENSOR TAMPER)

    Not sure what is going on with your 9600. Hence why I figured I should set
    one up and see what's different. I already had the P1632 handy to play
  4. Bob La Londe

    Bob La Londe Guest

    Probably speaks with a hoity toity fake Texas accent.
  5. Bob La Londe

    Bob La Londe Guest

    Pssssssst! Hey Mark! That was a dig.
  6. Jim

    Jim Guest

    Psssssssst! Hey Bob! They don't know what hoity toity means .....
    in Texas.
  7. Bob La Londe

    Bob La Londe Guest

    That's why its a "fake" Texas accent.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day