Connect with us

Napco Master Password

Discussion in 'Security Alarms' started by njcunha, Jan 21, 2009.

Scroll to continue with content
  1. njcunha

    njcunha Guest

    I have a 3200 Gemini Napco board useless because I missed its master
    password. I need your help on how to unveil its password.
    Thanks,

    Nelson Cunha ( Brazil )
     
  2. Jim Rojas

    Jim Rojas Guest

    In inside the main control panel for a white label marked MASTER
    SECURITY CODE.

    Jim Rojas
     
  3. Jim Rojas

    Jim Rojas Guest

    Look inside the main control panel for a white label marked MASTER
    SECURITY CODE.

    Jim Rojas
     
  4. Jim Rojas

    Jim Rojas Guest

    I can retrieve the MSC from the chip. It's a very simple process. I
    think Napco charges $50 for a replacement chip these days.

    Jim Rojas
     
  5. njcunha

    njcunha Guest

    Hi Jim,
    I found a label inside metal cover ( GEM 3200 068311) could be the
    Master Security Code. I will hard reset the board ( pin14 (-) to
    diode D14 and try this code 0 6 8 3 1 1. If it is wrong I need your
    help on retriving the MSC from the chip. Thank you very much.

    Hi Robert,
    I am far from Salvador, 1,000 km actually. I live in Belo Horizonte -
    Minas Gerais. Thank you for your offer. I will try the number above
    and let you know the results . Many Thanks,

    Nelson
     
  6. njcunha

    njcunha Guest

    Hi Jim,
    The code was wrong so I need retrieve the MSC from the chip. Could you
    give me these instructions on how to do that?
    Many thanks,
    Nelson
     
  7. Jim

    Jim Guest

    Yeah Jim, can you tell him how to do that?
     
  8. G. Morgan

    G. Morgan Guest

    I would also be interested in reading about that.
     
  9. alarman

    alarman Guest

    Uh, yeah. Me too, Jim.
     
  10. Petem

    Petem Guest


    Same here!! LOL
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-