Napco 1632 and RP1CAE-2 programmable output

[Dirk]

Can the programmable output available on the RP1CAE-2 keypad be
utilized from a 1632 panel, and if so, how?

I can find no reference in the supplied manuals.

Regards,
Dirk

 

[Mark Leuck]

That keypad has no PGM outputs

 

[Bob La Londe]

The brown wire on the RP1CAe2 is a PGM output that will follow one of the
PGMs on the board with a 3200 or a 9600. IT DOES NOT WORK WITH A P1632.
You have to use the PGMs on the board.

 

[Bob La Londe]

P.S. Sorry Mark. It so rare that I see you get one wrong I had to jump in.

 

[Mark Leuck]

Thats fine, I was looking over the schematics and didn't see that wire