Connect with us

Nail Polish Remover PCB

Discussion in 'PCB Layout, Design and Manufacture' started by Bluejets, Sep 19, 2018.

  1. Bluejets

    Bluejets

    2,986
    579
    Oct 5, 2014
    Came across this video, seems fairly simple procedure for toner transfer with good results.

    As with many of these things, works for some but not for others.
    Guess just try and see.




    Edit:......Curious though as to which chemical actually does the job....:):):)

    Ingredients
    Acetone, Aqua, Parfum, Ethoxydiglycol, PPG-12-PEG-50 Lanolin, Benzophenone-3, Panthenol, Tocopheryl Acetate, Aloe Barbadensis Leaf Extract, Propylene Glycol, Sodium Benzoate, Methylparaben, Sorbic Acid, Benzyl Cinnamate, Benzyl Salicylate, Cinnamyl Alcohol, Hydroxyisohexyl 3-Cyclohexene Carboxaldehyde, CI 42053, CI 19140, CI 42090
     
    Last edited: Sep 19, 2018
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    8,695
    1,692
    Nov 17, 2011
    I'll put all my eggs in one basket and bet on acetone.
     
  3. dave9

    dave9

    564
    117
    Mar 5, 2017
    It's the acetone in nail polish remover that gets the toner off. Yes you can use nail polish remover but a jug of acetone from a hardware store is much cheaper per oz and stronger so you need fewer ounces per job... and doesn't leave all those other ingredients behind that you need a 2nd step to clean off.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...