Connect with us

My tool for designing elliptic stripline filters

Discussion in 'Electronic Design' started by Nico Coesel, Mar 1, 2013.

Scroll to continue with content
  1. Nico Coesel

    Nico Coesel Guest

    A couple of months ago I posted a question on how to design an
    elliptic filter made out of micro stripline. That got me some pointers
    but not a clear answer. After some more Googling I found a book which
    had a couple of equations. Those are so difficult to solve I couldn't
    get away with an Excel sheet let alone solve them by hand. So decided
    to write my own solver. Being at it I wrapped it into a nice GUI and I
    decided to turn it into a (cheap) product.

    Ofcourse I did some simulation and testing and it turns out the
    geometries calculated by my program produce working filters!

    It available for download from my website:

    At this moment it can only calculate geometries of 3rd, 5th and 7th
    order elliptic filters (which is by far the hardest part).
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day