Connect with us

My Tek 755 trace disappear after switch on

Discussion in 'Troubleshooting and Repair' started by Danny_40, Oct 6, 2007.

  1. Danny_40

    Danny_40

    4
    0
    Oct 3, 2007
    Hello people
    My old Tektronix 755 at power on display trace from each channel and if calibration signal is feed also the timebase seem is working, but after few seconds the trace go off and for displaying newly I need to switch off and on again.
    Can somebody help me ?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-