Connect with us

Mustek R-100A DVD Recorder

Discussion in 'Electronic Repair' started by The Old Guy, Apr 20, 2007.

Scroll to continue with content
  1. The Old Guy

    The Old Guy Guest

    Hello All, I have been gifted this item brand new and boxed. When it
    works its really quite good. I say "When" because everything is very
    slow to respond i.e. open/close button sometimes works sometimes
    doesnt. The remote control is a real hit and miss job, any button
    seeming to work only once in a dozen presses. There is obviously
    something fundamentally wrong with the unit. I used to run a TV/Video
    repair workshop 20 years ago, so I have some skills in repair. Does
    anyone know any common problems with this item? Maybe a basic design
    flaw etc., also does anyone know if there are any circuit diagrams
    available?. I know that a lot of the new far-east sourced stuff these
    days doesnt have any.
    BTW sending the unit back where it came from is not an option as it
    was bought in an auction.
    Thanks in advance for any assistance.
    Roy - the old guy.
     
  2. b

    b Guest

    welcome to the world of budget dvd recorders. they're all like that,
    at least the ones i've seen!
     
  3. Paul Feaker

    Paul Feaker Guest

    I don't know about that. I got a Panasonic that does the same things, if it
    makes you feel better.
     
  4. Jerry G.

    Jerry G. Guest

    All of these low cost units have performance and mechanical problems. I
    would not put too much effort in to this type of unit.

    --

    Jerry G.


    Hello All, I have been gifted this item brand new and boxed. When it
    works its really quite good. I say "When" because everything is very
    slow to respond i.e. open/close button sometimes works sometimes
    doesnt. The remote control is a real hit and miss job, any button
    seeming to work only once in a dozen presses. There is obviously
    something fundamentally wrong with the unit. I used to run a TV/Video
    repair workshop 20 years ago, so I have some skills in repair. Does
    anyone know any common problems with this item? Maybe a basic design
    flaw etc., also does anyone know if there are any circuit diagrams
    available?. I know that a lot of the new far-east sourced stuff these
    days doesnt have any.
    BTW sending the unit back where it came from is not an option as it
    was bought in an auction.
    Thanks in advance for any assistance.
    Roy - the old guy.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-