Maker Pro
Maker Pro

Mustek 600CU

J

joe

Jan 1, 1970
0
Is anybody familiar with the electronics on this?

I switched it on one day, the LED flicked on and then off. I checked the
output from the adapter and the voltage had gone high, so it looks like
something blew. The question is, what?

Thanks for any ideas
 
C

CSM1

Jan 1, 1970
0
joe said:
Is anybody familiar with the electronics on this?

I switched it on one day, the LED flicked on and then off. I checked the
output from the adapter and the voltage had gone high, so it looks like
something blew. The question is, what?

Thanks for any ideas
I have not worked on a Mustek 600CU, but I was a electronics service tech
for many years.

What Blew?
If you are lucky, a fuse inside the scanner.
If you are not lucky, some part in the power path inside the scanner blew.

In the power adapter, I would guess a voltage regulator blew (shorted on).
Which means you need a replacement, if the scanner blew a fuse and not some
part in the electronics.

You won't know until you open the scanner and look at the electronics.
 
J

joe

Jan 1, 1970
0
CSM1 said:
I have not worked on a Mustek 600CU, but I was a electronics service tech
for many years.

What Blew?
If you are lucky, a fuse inside the scanner.
If you are not lucky, some part in the power path inside the scanner blew.

In the power adapter, I would guess a voltage regulator blew (shorted on).
Which means you need a replacement, if the scanner blew a fuse and not some
part in the electronics.

You won't know until you open the scanner and look at the electronics.
No, nothing so easy as a fuse which is what I had been hoping for. I
thought probably one of the diodes or a chip.

Anybody got a spare circuit board!
 

Similar threads

T
Replies
3
Views
1K
Jerry G.
J
S
Replies
2
Views
1K
Stefan Toftevall
S
Top