Connect with us

Multisim Guitar Pedal Help!

Discussion in 'General Electronics Discussion' started by dockchrlie, May 21, 2014.

Scroll to continue with content
  1. dockchrlie

    dockchrlie

    2
    0
    May 21, 2014
    Hello! I'm having a problem with my Multisim circuit. Whenever I simulate the circuit and throw switch S1A, Multisim says there is an error and it will exit the simulation.

    Help appreciated!

    This is my multisim circuit:
    multisim.JPG
    This is the circuit I'm trying to create: original.JPG
     
  2. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    8,393
    1,270
    Nov 28, 2011
    What error does it report?

    There's nothing inherently wrong with that circuit.
     
  3. dockchrlie

    dockchrlie

    2
    0
    May 21, 2014
    "A simulation error has occurred. Would you like to run the Convergence Assistant to attempt to resolve this problem automatically?"
     
  4. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    8,393
    1,270
    Nov 28, 2011
    I Googled that error message and got several hits. One of them suggested using the convergence assistant, and listed some possible causes.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-