Connect with us

Multisim 2001 Oscilloscope Max Frequency issue

Discussion in 'Electronic Design' started by Kevin Doyle, Sep 26, 2004.

Scroll to continue with content
  1. Kevin Doyle

    Kevin Doyle Guest

    Hi all.
    I was wondering if it is possible to increase the frequency at which the
    oscilloscope in multisim 2001 personal can capture signals.
    Or is there other simulation software out there that can measure up to about

  2. John Larkin

    John Larkin Guest

    Did they deliberately brain-damage it to restrict its usable
    simulation range? Maybe so... they sell an extra-price microwave/RF
    option, and I never understood why.

    I don't like these people, based on experience.

    All the Spice and Spice-like programs I've ever used allowed
    unrestricted time steps and plot ranges, limited only by the
    floating-point format of the CPU.

  3. Kevin Doyle

    Kevin Doyle Guest

    Hi John,
    Could you name one of the packages you have used so I can look it up on the

  4. John Larkin

    John Larkin Guest

    Lately I use CircuitMaker, but that's just because I'm used to it.
    Probably the best deal around is LT Spice, which I mean to install and
    learn one of these days. It's free.

  5. Kevin Doyle

    Kevin Doyle Guest

    By the way I got Multisim working with my 50HHz RF oscillator.
    I used the bode plotter between the osc input and out put terminals. and
    added a low freq low amplitude source to the input to as this is required to
    fool the Spice modler to kick off the oscillator calculations.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day