Connect with us

multiple VDD pins

Discussion in 'Electronic Basics' started by [email protected], Jun 18, 2007.

Scroll to continue with content
  1. Guest

    I'm trying to wire up Panasonic EDMGRB8KJF LCD to a Gumstix. I
    successfully ran power to the backlight on the LCD today using a
    simple adjustable wall wart power supply and a terminal adapter.

    Now I'm trying to figure out how to provide power to the LCD.
    According to the docs:
    (see page 5), there are 4 lines for power and 4 for ground. The
    backlight took one power line and one ground directly from the
    terminals. Can I just run 4 wires from the terminals on a power supply
    in the same fashion?

    Thanks in advance.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day