Connect with us

multimeter with scope calibration function

Discussion in 'Electronic Basics' started by Jerry Jensen, Feb 16, 2006.

Scroll to continue with content
  1. Jerry Jensen

    Jerry Jensen Guest

    I've got a Sears 982015 digital multimeter with a square wave
    generator function on it. I want to use the function to calibrate an
    oscilloscope but I don't know the frequency nor amplitude of the
    signal it produces. Does anyone out there have the manual or other
    data on this meter? HElp please. Thanks.

    Jerry Jensen
     
  2. You must not care about the accuracy of your 'scope.

    If you need to calibrate it, do it right and invest in the proper
    hardware to do a decent calibration. Failing that, professional cal for
    older 'scopes is not terribly expensive. As one example, I've been
    quoted about $73 for the Tektronix 7904 mainframe.

    Happy tweaking.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-