Connect with us

Multimeter and Solder Iron Question

Discussion in 'General Electronics' started by Bill Davis Jr, Nov 24, 2003.

Scroll to continue with content
  1. Two quick questions

    Are Grizzly multimeters good?


    How about Weller solder irons?


  2. JeffM

    JeffM Guest

    Are Grizzly multimeters good?
    Grizzly (never heard of it before) appears to be a re-branded Chinese

    Weller and Ungar are the big names in irons.
    There are old Curie-point type units
    and newer solid state (feedback) controller types
    as well as uncontrolled types.
    Which have you been checking out?

  3. Not doing anything big I was looking at the Weller WE-WP25.

    Still looking for a good multimeter. Fluke's are little out of price
    range for the odd job's I will be doing.

    I can not buy anything local in my area as the only electronic's store
    in my area closed their door for good. I now have to look on the net.

  4. Robert Baer

    Robert Baer Guest

    Check out Jameco for miltimeters at reasonable prices.
  5. Rich Grise

    Rich Grise Guest

  6. JeffM

    JeffM Guest

    Bill Davis Jr
    Nice unit. Tips & elements are replaceable.
    No ESD (tip not grounded) may be an issue.

    Don't dismiss John Fluke right off.
    Consider a used unit (with a guarantee).
    Rich already mentioned ebay.
  7. Thanks to all that replied.

    I ended buying a Weller WES51 soldering station.

    I will keep a watch on Ebay for multimeters.

  8. N. Thornton

    N. Thornton Guest

    try rapid electronics.

    Regards, NT
  9. Jimmy

    Jimmy Guest

  10. Well yesterday I eneded up bidding on and winning a Brand new Fluke 87
    III for $215. I thought what the heck it is coming to the Holiday
    Season. Why not treat myself.

    There were plenty of pictures with the item. Everything looked in mint
    condition. Manual, cd-rom, probes, and Calibration form all there.
    Btw, when you get a new one, does the manual come shrink wrapped? As
    this one does in the pictures.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day