Connect with us

Mount a graphical LCD module

Discussion in 'Misc Electronics' started by terry, Nov 10, 2004.

Scroll to continue with content
  1. terry

    terry Guest

    Hi,

    What is the usual ways to mount a graphical LCD module to the case?

    I have thought 2 ways:

    1.Use copper rods to mount the LCD to my target MCU board and so there
    is no need to screw the LCD to the case.

    2. Screw the LCD to the case and use flat cable to connect it to the
    target board.

    Thanks!
     
  2. CWatters

    CWatters Guest


    Here is an example of an DIL LCD fitted to a PCB just using the sockets and
    retained by the case lid.

    http://home.netsurf.de/gernot.fink/gpi.jpg

    http://home.netsurf.de/gernot.fink/gpa.jpg

    Main problem is water/dust entry. It's also possible to get a bezel.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-